Can you touch up satin paint

Touch-up Mistakes to Avoid Same color, wrong shade. White paint comes in literally hundreds of shades, and touching up the finish properly requires choosing the same shade of paint as was originally painted on the wall. Looking straight at a wall, flashing may not be obvious. But when you view the surface from the side, imperfections are visible where light is reflected. Common occurrences of flashing include when a shiny paint finish is applied on patches of bare wall.

Other steps are required for the finish to look right, including using repair spackle and latex primer prior to applying a finish of shiny paint. Covering stains in a way that produces bleed-through. Not all touch-ups should be handled in the same way. Hard to say without seeing. Do you have a picture?

Like Save. Like 1 Save. Related Discussions eggshell or flat paint for living room? Flat paint hides any textural imperfection in the wall that would be more evident in a bright, sunny room. Individual marks can be removed with gentle scrubbing with comet. I would not try to wash an entire flat paint wall, however.

Also, a flat painted wall is much easier to touch up without requiring you to reprint the whole wall. I think flat walls look better. If it's not a super sunny room, eggshell paint might be a goo alternative if you like the look of it and feel the need for washable walls. Matte or eggshell Q. If the walls are in great shape, no patches, smooth, then an eggshell or satin finish is nice.

Same goes for ceilings, though I despise painting a low ceiling with a flat finish Good Luck! Thanks, Arizona Snoopy. Glad I'm not alone in my predicament. What brand of paint did you use? From my understanding, the satin and eggshell finishes from Sherwin Williams are very similar. As a result, I was considering their flat enamel instead. The painter is coming tomorrow so I will need to pick up more paint in the morning. I realized though that the interaction between the floor and the walls is not exclusive to those painted with the satin finish.

The ceiling, closet doors, and trim also exhibit those unsightly pink and yellow tones so I'm wondering if changing the light bulbs or getting a few rugs would help more. The one side of the room is lit with eight 75W halogen flood lamps but together they're not very bright. I wonder if stronger, brighter lighting would better illuminate the true color of the walls i.

Origami White. I'm not sure. Maybe opting with cooler or whiter lighting would help too. But, as the image I included earlier shows, I would not want to venture too far to the opposite end of the spectrum as harsh fluorescent lighting is just as ugly.

Unfortunately, the budget does not permit sanding and re-staining the hardwood floors, but I did think about that. In daylight, the reflectivity and play between the color of floor and the color of the walls is almost nonexistent. It's at night where this effect becomes much more pronounced.

Ok, enough over analyzing for one night! Anyone used eggshell finish on door and trim Q. Hmmm, this is an intriguing question as it is not the " style" to do trim an doors in low sheen paint these days. If you use flat you can probably touch it up with a small nap roller pretty good just feather it out really well.

In addition to using the same tin, make sure you're feathering the new paint into the old. This will make any color changes harder to see. If the paint has faded significantly, I'd just repaint the entire wall.

I've read that the more glossy a paint finish is, the worse it is to disguise touch-ups. The issue is the fact that the molecules that reflect light build up and make the touched up area more glossy than the rest of the wall. So, flat paint is the best for touch-ups; higher gloss paint is best for scrubbing and cleaning.

That's another flip-side: when you scrub, you dull the gloss. I do this at home with satin paint on all my walls: I touch up an area, then use a Mr. Clean Eraser to buff the area a little to make sure it is not more glossy than the rest of the wall. Paint takes quite a while to cure, during which the color typically darkens.

Some brands might do this to varying degrees but it is common to all paints. Whites tend to yellow which can make the difference more noticeable. Try keeping a wet edge and roll as close as you can to every edge. Trying to get too much paint out of a roller will also cause this.

Keep the roller fairly well wet with paint. Roll in a Single Direction That's not true when you apply an eggshell finish. You should roll in one direction only, preferably from floor to ceiling. Don't back the roller up when you finish a course. Instead, bring the roller back to its starting point so you can apply the next course in exactly the same way. Original paint or not, the only way to avoid a flashing problem is to do a whole wall.

Trim should be treated in the same way as shiny finishes, painting from one break point to another. Break points for trim are the points where two separate pieces of molding come together as at the corners of a door or window frame. Eggshell : Eggshell paint is slightly more scrubbable than flat, but still probably not ideal for most bathrooms unless it is specially-formulated for this. Semi-gloss or Gloss: Semi-gloss and gloss paint are both very durable and well suited for bathrooms because they are highly scrubbable.

Using Dark Color Paint : Just like the same way, flat finishes reduce dent visibility; darker paints also reflect less light than lighter paints. This makes them a better choice for hiding drywall imperfections.

The only drawback of using dark color paint often makes the room look smaller. Can you touch up satin paint? Category: hobbies and interests painting. Situation 1 - When there is very low or no sheen on the paint. Flat paints are much easier to touch up than satin or semigloss. If the paint on the walls or ceiling is not faded or dirty, and if you have an exact paint match, you can probably touch it up. Why is my touch up paint shiny?

Will touch up paint match?